Products

The NCE 524-235 UTP-CAT5 Adapter converts the 6-wire RJ cab bus signal used in NCE DCC systems to the 8-wire CAT5 format used with NCE UTP (Universal Throttle Panel) products. This adapter bridges older-style cab bus wiring with CAT5-based cab bus infrastructure, making it an essential part of any NCE system expansion using UTP panels.

Arizona Hobbies is an authorized NCE DCC dealer in Tucson, AZ. We carry the full NCE product line and ship nationwide.

• Signal Conversion — Converts 6-wire RJ cab bus to 8-wire CAT5 cab bus format
• UTP Compatibility — Works with NCE Universal Throttle Panel (UTP) products
• Layout Expansion — Bridges traditional RJ cab bus with CAT5 infrastructure
• Plug-and-Play — Simple inline conversion; no configuration required

The NCE 524-236 Dual Relay Board provides isolated relay outputs for NCE Switch8 or Switch-It accessory decoders, allowing them to control higher-current or isolated loads. Each board provides two 2-amp relay connections for powering accessories that require galvanic isolation from the DCC bus. Discontinued by NCE and available while supplies last.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Function — Dual isolated relay outputs for Switch8 or Switch-It decoders
• Relay Rating — 2 amps per relay
• Benefit — Galvanic isolation for accessories requiring separate power
• Compatibility — NCE Switch8 and Switch-It accessory decoders
• Status — Discontinued by NCE; available while supplies last

The NCE 524-237 is a 10-foot CAT5 cab bus cable for use with NCE UTP (Universal Throttle Panel) products and other CAT5-based cab bus infrastructure. At 10 feet (3.05 m), it provides ample reach for connecting UTP panels across a layout without excess cable bulk.

Arizona Hobbies is an authorized NCE DCC dealer in Tucson, AZ. We carry the full NCE product line and ship nationwide.

• 10-Foot Length — 3.05 m CAT5 cable for UTP cab bus connections
• CAT5 Connectors — Standard 8-wire connectors on both ends
• Compatible With — NCE UTP panels and CAT5 cab bus systems
• UTP Infrastructure — Works alongside NCE 524-234 UTP panels and 524-235 adapters

The NCE 524-238 P514 is the factory-specified 5-amp, 13.8V/12V DC power supply for the NCE PB5 and compatible PH5 Power Pro systems. Whether you're replacing a worn-out original or expanding your layout with an additional booster, the P514 delivers the correct regulated output voltage and current to keep your NCE DCC system running at full performance. Also included with the NCE PB5 UK (524-033) as the international variant.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ, and stocks the complete NCE power supply and accessories lineup.

• Output: 13.8V / 12V DC, 5 Amps — factory-specified for NCE PB5 and PH5 systems
• Regulated Output — maintains stable voltage for consistent DCC track power
• International-Ready Design — also supplied as the international variant with UK/EU cords on NCE UK products
• OEM NCE Component — genuine NCE P514 replacement supply
• Simple Replacement — plug-in connector matches PB5 and compatible booster inputs

The NCE 524-239 P314 is a dual-output power supply designed to power the NCE TWIN DCC starter system. Its two regulated 3-amp outputs provide independent, stable power to both the command station and the second control unit — keeping DCC signal quality clean and preventing crosstalk between power districts. A compact, dependable supply that eliminates the need to cobble together mismatched wall adapters for a dual-system setup.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ, and carries the full NCE power supply and system accessories line.

• Dual 3-Amp Outputs — two independent regulated outputs sized for the NCE TWIN system
• Regulated Power — stable voltage under load for consistent DCC operation
• Compact Design — easy to route and install at the layout
• NCE Engineered — factory-specified supply for the NCE TWIN DCC system

The NCE Brutus is the purpose-built 10-amp, 18V AC power supply for NCE's large-scale DCC boosters. If you're running a PH-PRO-10, PH-PRO-10R, or PB110A, the Brutus is the recommended power source — it delivers the sustained high-current output these boosters need to run large O and G scale locomotives reliably without voltage sag.

Arizona Hobbies stocks NCE accessories in Tucson, AZ.

• 10-Amp / 18V AC Output — matched to NCE large-scale DCC booster requirements
• Designed for use with NCE PH-PRO-10, PH-PRO-10R, and PB110A
• 120V US power cord (60Hz)
• Sustained high-current delivery — no sag under full load
• Heavy-duty transformer construction for long-term reliability
• Not compatible with SB5 or PB5 (those use the P514 or P519 supply)

The NCE 524-242 Locomotive Wiring Kit provides everything you need to wire DCC decoders into N or HO scale locomotives. Includes 80 feet of ultra-flex 30/32 AWG wire in 8 color codes, plus heat shrink tubing in three sizes for clean, professional installations. Discontinued by NCE and available while supplies last.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Wire — 80 feet of ultra-flex 30/32 AWG in 8 color codes
• Heat Shrink — 3 sizes for clean installations
• Scale — N and HO scale
• Applications — Decoder hard-wiring and locomotive DCC installations
• Status — Discontinued by NCE; available while supplies last

The NCE 524-243 LED Lighting Kit is a complete bundle for adding DCC-controlled LED lighting to model railroad locomotives and rolling stock. Includes 20 LEDs, an LED tester, 50 feet of ultra-flex #32 wire, 40 resistors, and heat shrink tubing in three sizes. Discontinued by NCE and available while supplies last.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• LEDs — 20 LEDs included
• Wire — 50 feet of ultra-flex #32 wire
• Components — 40 resistors, 3 sizes heat shrink, LED tester
• Applications — Locomotive and car DCC lighting installations
• Status — Discontinued by NCE; available while supplies last

NCE 524-260 resistors are 2.7K ohm, 1/8-watt through-hole resistors sold in a pack of 20. They are commonly used with NCE Light-It decoders and other DCC lighting accessories to limit current to LEDs — wire one in series between the decoder output and the LED for safe, consistent brightness without additional calculations.

Arizona Hobbies is an authorized NCE DCC dealer in Tucson, AZ. We carry the full NCE product line and ship nationwide.

• Resistance — 2.7K ohm (2,700 ohms)
• Power Rating — 1/8 watt
• Pack Quantity — 20 resistors per pack
• Common Use — LED current limiting for NCE Light-It decoders and DCC lighting accessories
• Color-Coded Bands — Easy visual identification

The NCE 524-262 Warm White LEDs are 3mm (T1) LEDs that deliver a soft, realistic warm-white glow perfect for modeling incandescent lighting in locomotives, passenger cars, and structures. Their compact size makes them ideal for tight installations, and their consistent brightness ensures a uniform look across your fleet and layout details.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Size — 3mm (T1) form factor for compact installations
• Color — Warm white for realistic incandescent-style lighting
• Quantity — 20 LEDs per pack
• Applications — Locomotives, passenger cars, structures, and layout details
• Compatibility — Works with DCC function outputs and low-voltage lighting circuits

The NCE 524-267 LWK25 Layout Wiring Kit provides 25 feet of pre-cut DCC power bus wire along with feeder wire and connectors for wiring a small-to-medium DCC layout. Everything is sized and specified for reliable DCC power distribution. Discontinued by NCE and available while supplies last.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Bus Wire — 25 feet of heavy-gauge DCC power bus wire
• Includes — Feeder wire and connectors
• Application — Small-to-medium DCC layout wiring
• Status — Discontinued by NCE; available while supplies last

The NCE 524-268 LWK50 Layout Wiring Kit gives you 50 feet of pre-cut DCC power bus wire — enough to wire a medium-to-large home layout from end to end. The kit includes everything you need to run a clean, reliable DCC power bus: heavy-gauge bus wire, feeder wire, and the connectors to make solid, professional-quality connections throughout. Stop improvising with whatever wire is in the parts bin — the LWK50 gives you the right wire in the right gauge, ready to go.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ, and carries the full NCE wiring accessory line.

• 50-Foot DCC Power Bus — covers medium-to-large layout wiring in one kit
• Correct Gauge Wire — heavy-gauge bus wire sized for DCC power distribution
• Complete Kit — bus wire, feeder wire, and connectors included
• Professional-Quality Results — clean, reliable connections throughout the layout
• NCE Engineered — wire and hardware specified for NCE DCC systems and broader NMRA layouts

The NCE 524-275 Track Bus Taps are blue insulation displacement connectors designed for connecting feeder wires to your 14–16 AWG DCC main bus quickly and cleanly. No cutting or stripping the bus wire needed — just insert, crimp, and you have a solid electrical connection in seconds. This 64-pack is ideal for larger layouts or keeping a full supply on hand.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Wire Gauge — Designed for 14–16 AWG bus wire (blue insulation)
• Quantity — 64 connectors per pack
• Installation — No cutting main bus wire; tap in and crimp
• Connection — Solder-free, secure insulation displacement
• Compatibility — All NMRA-compatible DCC layouts

The NCE 524-276 Track Bus Taps are yellow insulation displacement connectors designed for heavier 12–10 AWG DCC main bus wire. Tap into your power bus without cutting or stripping the primary wire — simply insert, crimp, and make a solid connection in seconds. This 32-pack covers medium-to-large layout sections with ease.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Wire Gauge — Designed for 12–10 AWG bus wire (yellow insulation)
• Quantity — 32 connectors per pack
• Installation — No cutting main bus wire; tap in and crimp
• Connection — Solder-free, secure insulation displacement
• Compatibility — All NMRA-compatible DCC layouts

The NCE 524-277 Male Quick Connect Terminals provide solder-free, reliable wiring connections for DCC layouts and electronic projects. Designed for 18–22 AWG wire with red insulation for easy identification, these crimp-on terminals let you wire track power, accessories, and control panels quickly and professionally. This 32-pack is sized for medium installations and layout upgrades.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Wire Gauge — Fits 18–22 AWG wire (red insulation)
• Quantity — 32 connectors per pack
• Installation — Solder-free crimp connection
• Housing — Insulated for short-circuit protection
• Applications — Track power, accessories, control panels, DCC wiring

The NCE 524-278 Male Quick Connect Terminals offer solder-free, professional wiring connections for DCC layouts and electronic projects. Designed for 18–22 AWG wire with red insulation, these crimp-on connectors are ideal for track power, accessories, and control panel wiring. This large 64-pack is perfect for full layout builds and bulk wiring projects.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Wire Gauge — Fits 18–22 AWG wire (red insulation)
• Quantity — 64 connectors per pack
• Installation — Solder-free crimp connection
• Housing — Insulated for short-circuit protection
• Applications — Track power, accessories, control panels, DCC wiring

The NCE 524-283 DCC Main Bus Wire gives you 100 feet of 14 AWG stranded wire in red — exactly what's needed for one polarity leg of a properly wired DCC main bus. Heavier gauge bus wire is the single most effective way to minimize voltage drop across a large layout, ensuring your boosters deliver full track voltage to every locomotive no matter how far it is from the power injection point. Red color keeps polarity consistent and wiring diagrams readable.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ, and carries NCE wiring supplies and layout accessories.

• 14 AWG Stranded Wire — heavy gauge for low-resistance, low-voltage-drop DCC bus runs
• 100-Foot Spool — covers end-to-end bus runs on medium-to-large layouts
• Red Insulation — conventional positive polarity color for organized, readable wiring
• Flexible Routing — stranded construction bends easily around benchwork framing
• Universal Application — works with NCE and all other NMRA DCC systems

The NCE 524-284 DCC Main Bus Wire provides 25 feet of heavy-duty 14 AWG black wire for building a reliable DCC power bus on your layout. Proper gauge bus wire is essential for minimizing voltage drop and delivering consistent, stable power to all sections of your layout. The flexible insulation makes routing under your benchwork simple.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Gauge — 14 AWG for high-current DCC bus applications
• Length — 25 feet per roll
• Color — Black (pairs with a matching color for two-wire bus)
• Application — Main DCC power bus from booster to track feeders
• Flexibility — Flexible insulation for easy under-layout routing

The NCE 524-287 Male Quick Connect Terminals provide solder-free, reliable connections for wiring DCC layouts and electronic projects. Designed for 18–22 AWG wire with red insulation for quick identification, these crimp-on connectors handle track power, accessories, and control panel wiring cleanly and professionally. This 20-pack is a convenient starter supply for small projects and repairs.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Wire Gauge — Fits 18–22 AWG wire (red insulation)
• Quantity — 20 connectors per pack
• Installation — Solder-free crimp connection
• Housing — Insulated for short-circuit protection
• Applications — Track power, accessories, control panels, DCC wiring

The NCE 524-293 Euro 3-5 Terminal Strips are compact Eurostyle screw terminal blocks designed for clean, solder-free wiring connections in DCC layouts and control panels. Each 3-circuit strip supports secure screw-down connections for power distribution, accessory wiring, and panel work. This 5-pack provides plenty for multiple wiring points.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Configuration — 3-circuit Eurostyle terminal strip
• Quantity — 5 strips per pack
• Connection Type — Screw-down terminals, no soldering required
• Applications — DCC wiring, accessory circuits, control panels
• Build — Durable insulating body with quality metal contacts

The NCE 524-294 Euro 4-4 Terminal Strips are Eurostyle screw terminal blocks designed for clean, reliable wiring in DCC layouts and electronic projects. Each 4-circuit strip offers secure screw-down connections with no soldering required, keeping your wiring neat and organized. This 4-pack is ideal for panel work, accessory wiring, and power distribution points.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Configuration — 4-circuit Eurostyle terminal strip
• Quantity — 4 strips per pack
• Connection Type — Screw-down terminals, no soldering required
• Applications — DCC wiring, accessory circuits, control panels
• Build — Durable insulating body with quality metal contacts

The NCE 524-295 Euro 6-3 Terminal Strips are Eurostyle screw terminal blocks for organized, solder-free wiring in DCC layouts and electronic projects. Each 6-circuit strip handles multiple secure connections in a compact footprint — perfect for consolidating wiring at control panels, accessory drops, and power distribution points. This 3-pack covers several installation spots.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Configuration — 6-circuit Eurostyle terminal strip
• Quantity — 3 strips per pack
• Connection Type — Screw-down terminals, no soldering required
• Applications — DCC wiring, accessory circuits, control panels
• Build — Durable insulating body with quality metal contacts

The NCE 524-305 RC Filter (Snubber) 2-Pack helps protect your DCC layout by suppressing harmful voltage spikes and electrical noise on the track bus. Installing snubbers across your track reduces the risk of decoder resets, erratic locomotive behavior, and component damage — especially on larger layouts or those with long track runs. Compatible with any DCC system.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Function — Suppresses voltage spikes and electrical noise on DCC track
• Quantity — 2 snubber units per pack
• Benefit — Reduces decoder resets and erratic operation
• Installation — Connects directly across track power leads
• Compatibility — Works with all NMRA-compatible DCC systems

The NCE 524-306 Capacitor Kit includes six 300µF 2.7V capacitors for use in NCE DCC decoder circuits and compatible electronics. These capacitors help smooth power delivery, maintain stable voltage during brief track interruptions, and reduce lighting flicker in decoders. An essential component for decoder repairs, custom builds, and keep-alive modifications.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Specification — 300µF, 2.7V electrolytic capacitors
• Quantity — 6 capacitors per pack
• Applications — Decoder power smoothing, keep-alive circuits, repairs
• Size — Compact form factor for decoder installations
• Compatibility — NCE DCC decoders and compatible electronics

The NCE 524-308 3-Pin Wiring Harness 8-Pack provides pre-wired connectors for quick, clean hookups on NCE DCC components that use 3-pin connections. No custom soldering required — color-coded wires make installation straightforward and consistent. This 8-pack is ideal for new installations, replacements, and maintenance on NCE accessories and boards.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Connector — 3-pin Molex-style wiring harness
• Quantity — 8 harnesses per pack
• Wiring — Pre-wired with color-coded leads
• Installation — Plug-in connection, no soldering required
• Applications — NCE DCC boards, lighting, internal wiring connections

The NCE 524-310 5-Pin Wiring Harness 5-Pack provides pre-wired connectors for quick, reliable connections to NCE DCC throttles, panels, and components that use 5-pin connections. Color-coded wires eliminate guesswork and custom soldering, making installation fast and consistent. This 5-pack covers multiple connection points for new builds and maintenance.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Connector — 5-pin wiring harness
• Quantity — 5 harnesses per pack
• Wiring — Pre-wired with color-coded leads
• Installation — Plug-in connection, no soldering required
• Applications — NCE throttles, control panels, and internal wiring

The NCE 524-320 USB to Serial Cable provides a 6-foot connection between your computer and the NCE Power Pro DCC system for programming, configuration, and software communication. It features a standard USB Type-A connector on the computer end and a DB9 serial connector for the NCE system, making it the go-to cable for JMRI integration and decoder programming sessions.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Length — 6 feet
• Connectors — USB Type-A to DB9 serial
• Compatibility — NCE Power Pro and NCE command stations with serial interface
• Software — Works with JMRI and other DCC programming applications
• Build — Shielded cable for stable data transmission
• Note — USB drivers may be required depending on operating system

The NCE 524-325 P519 is the factory-specified 5-amp, 19VDC power supply for NCE Power Pro PH5 systems. It delivers stable, regulated output that meets NCE's exacting voltage and current specifications, ensuring consistent DCC performance across your layout without voltage sag under load. If you're replacing a worn supply or setting up a second PH5-based system, this is the correct OEM unit.

Note: The P519 is not compatible with SB5, DB5, or PB5 booster systems — those units use the P514 13.8V/12V DC supply.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ, and stocks the full line of NCE system accessories and replacement parts.

• Output: 19VDC, 5 Amps — factory-specified for the NCE Power Pro PH5 command station
• Stable, Regulated Output — maintains consistent voltage under load for reliable DCC operation
• Compact Inline Design — easy to route and install in any layout setup
• OEM NCE Component — genuine NCE part built to Power Pro specifications
• Not for SB5/DB5/PB5 — those boosters require the P514 12V/13.8V DC supply

The NCE 524-326 DCC Meter is an indispensable diagnostic tool for any DCC layout. Connect it inline between your command station or booster and the track to get real-time readings of track voltage and current — instantly see whether your system is delivering the power your locomotives need, and catch shorts, overloads, and voltage drops before they become problems. The backlit LCD makes readings easy whether you're at the bench or trackside at a club layout.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ, and stocks a full range of DCC diagnostic tools and accessories.

• Real-Time Voltage & Current Monitoring — live track readings help tune and troubleshoot any DCC layout
• Backlit LCD Display — bright, easy-to-read in any lighting condition
• Inline Installation — connects between command station/booster and track in seconds
• Short & Overload Diagnostics — quickly identify electrical faults and load conditions
• Universal Compatibility — works with all NCE systems and most NMRA-compliant DCC systems
• One-Button Operation — simple to use with no complex setup

The NCE 524-402 EPROM is a genuine factory-programmed firmware upgrade chip for the NCE Power Cab DCC throttle system. Replacing the existing EPROM brings the latest features, bug fixes, and improved stability — extending the useful life of your Power Cab without replacing the entire unit.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Compatibility — NCE Power Cab DCC throttle
• Benefit — Latest firmware features, bug fixes, and improved stability
• Installation — Direct EPROM chip swap (anti-static precautions required)
• Source — Genuine NCE factory-programmed chip
• Note — Requires opening the Power Cab unit to replace the existing chip

The NCE 524-403 EPROM Firmware Upgrade Chip is a genuine factory-programmed replacement chip for the NCE SB3, SB3a, and SB5 Smart Booster. This firmware update improves system stability, enhances communication with command stations and throttles, and ensures your booster operates at current NCE standards — bringing older Smart Boosters up to modern performance without replacement.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Compatibility — NCE SB3, SB3a, and SB5 Smart Boosters
• Benefit — Improved stability and compatibility with newer NCE components
• Installation — Direct EPROM chip swap (anti-static precautions required)
• Source — Genuine NCE factory-programmed chip
• Note — Requires opening the booster unit to replace the existing chip

The NCE 524-412 EPROM Upgrade Chip is a genuine factory-programmed firmware update for NCE Power Pro command stations, featuring the 2021 version firmware. Installing this chip brings the latest NCE features, performance improvements, and bug fixes to your Power Pro system, ensuring solid, reliable DCC operation at current standards.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Compatibility — NCE Power Pro command stations
• Version — 2021 firmware release
• Benefit — Latest features, performance improvements, and bug fixes
• Installation — Direct EPROM chip swap (anti-static precautions required)
• Source — Genuine NCE factory-programmed chip
• Note — Requires opening the command station to replace the existing chip

The NCE 524-501 Membrane Keypad is a genuine OEM replacement overlay for NCE Cab04, Cab05, and Cab06 Engineer series throttles. When your original keypad becomes worn, faded, or unresponsive, this precision-molded replacement restores full button responsiveness and tactile feel — keeping your Engineer cabs in service for years to come. All button positions and cutouts match original NCE specifications exactly.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Compatibility — NCE Cab04, Cab05, and Cab06 Engineer throttles
• Function — Restores button responsiveness and tactile feedback
• Fit — Precision-molded to exact OEM specifications
• Protection — Shields internal electronics from dust and debris
• Build — Durable flexible material for long service life

The NCE 524-503 Replacement Case is a genuine OEM housing for the NCE Power Cab DCC throttle. If your Power Cab has a cracked, broken, or worn-out shell, this complete front-and-rear case set restores it to like-new condition at a fraction of the cost of a full replacement. All button cutouts, display openings, and mounting points are precision-molded to NCE specifications for a seamless fit.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Compatibility — NCE Power Cab DCC throttle
• Contents — Front and rear housing halves
• Fit — Precision-molded OEM replacement; all cutouts correctly aligned
• Benefit — Restores appearance and structural integrity cost-effectively
• Build — Durable plastic construction for long-term use

The NCE 524-506 Encoder Thumbwheel Assembly is a genuine OEM replacement component for NCE Pro Cab and Power Cab DCC throttles. The encoder thumbwheel is the primary speed control on these cabs, and over time it can wear out, skip, or become erratic. This replacement assembly restores smooth, precise speed control and reliable throttle feel, bringing your cab back to factory performance.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Compatibility — NCE Pro Cab and Power Cab DCC throttles
• Function — Replaces the speed control encoder thumbwheel
• Benefit — Restores smooth, precise speed input and eliminates skipping
• Fit — OEM replacement; direct installation into compatible cabs
• Build — Durable construction for long-term reliability

The NCE 524-507 Replacement Potentiometer is a genuine factory component for NCE Cab04P and Cab06P Engineer throttles. When the speed control potentiometer becomes worn, scratchy, or erratic, this direct replacement restores smooth, accurate throttle response without the expense of a complete cab replacement.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Compatibility — NCE Cab04P and Cab06P Engineer throttles
• Function — Replaces the speed control potentiometer
• Benefit — Restores smooth, accurate throttle speed control
• Fit — OEM replacement component for direct installation
• Build — Compact form factor for easy cab integration

The NCE 524-508 Power Pro System Reference Manual (Version 3.1.07) is the official printed guide for the NCE Power Pro DCC system and ProCab throttle. Whether you're setting up your system for the first time or exploring advanced functions like consisting, momentum, and decoder programming, this spiral-bound manual gives you clear, authoritative answers at the layout or workbench.

Arizona Hobbies is an authorized NCE dealer in Tucson, AZ. We carry the full NCE DCC product line and ship nationwide.

• Version — 3.1.07
• Covers — Power Pro system setup, ProCab operation, decoder programming, consisting, troubleshooting
• Format — Spiral-bound; lays flat for hands-free use
• Audience — Beginners to experienced NCE users
• Source — Official NCE reference documentation

The NCE 574-328 Fascia Panel is a mounting bracket designed for clean, flush installation of the NCE DCC Meter / Packet Analyzer into your layout fascia. All mounting hardware is included. The panel gives the NCE meter a built-in, professional appearance while keeping it easily accessible for monitoring DCC track voltage, current, and packet data.

Arizona Hobbies is an authorized NCE DCC dealer in Tucson, AZ. We carry the full NCE product line and ship nationwide.

• Fascia Mount — Designed for flush, finished installation in layout fascia
• Hardware Included — All mounting hardware in the box
• Compatible With — NCE DCC Meter / Packet Analyzer (sold separately)
• Professional Appearance — Gives the NCE meter a clean, built-in look on any layout

Softcover, 50 pages, opens to 8.

5 x 11 in., B&W maps, index.Sonrisa Railroad Maps are laid out like a railroad employee timetable. Narrow to fit in a pocket and with a heavier paper cover for protection. The center fold will present an overall map of the state(s). Includes short lines and major highways to find railroad lines and locations.

These maps are updated periodically.Concise, clear maps of today's railroading presented by subdivision for ease in following your favorite line. These pocket-sized references include station index, locations of detectors, crossovers and tunnels, and major rivers and highways. Soft cover with saddle-stitched binding (except California and Illinois, which are coil bound)

Features:

• New Soft cover David J. Cooley Sonrisa Publications 2014

Excel Blades 5.5" Soft Grip Needle Nose Pliers, Carbon Steel Precision Tool for Jewelry, Wire Bending & Repairs

Excel Blades Soft-Grip Needle-Nose Pliers are engineered for precision and comfort, making them an essential addition to any crafting or repair toolkit. Constructed from durable carbon steel, these 5.5-inch pliers feature a tapered, long-nose design for reaching tight spaces and handling delicate materials with care.

The soft grip plastic handles provide a secure, ergonomic hold, while the spring-loaded mechanism reduces hand fatigue, making them perfect for extended use. Whether you're bending wire, trimming headpins, shaping metal, or working on intricate jewelry or electronics, these pliers deliver control and performance.

Perfect for jewelers, model makers, DIYers, and professionals alike, these versatile pliers are a reliable solution for gripping, bending, cutting, and precision handling of small parts and materials.

KEY FEATURES

• Includes one (1) 5.5 inch (14 cm) precision needle nose pliers
• Made from high-quality carbon steel for durability and long-lasting use
• Soft plastic-coated grip handles for added comfort and control
• Spring-loaded action minimizes hand fatigue during extended use
• Ideal for jewelry making, wire bending, electronics, crafts, and repairs
• Fine tapered tips provide access to tight areas and allow precision work
• Suitable for cutting, shaping, gripping small parts, and closing jump rings

Excel Blades 5-inch Needle Nose Pliers with Cutter - Carbon Steel, Spring-Loaded

The Excel Blades 5-inch Needle Nose Pliers with Cutter are an indispensable tool for hobbyists, jewelers, electricians, and crafters who demand precision and versatility. Designed for intricate tasks, these pliers are expertly crafted from high-quality carbon steel, ensuring exceptional durability, strength, and reliable performance through countless uses.

Experience superior comfort during prolonged work sessions thanks to the plastic grip handles. These ergonomically designed grips provide a secure and comfortable hold, significantly reducing hand strain and discomfort. The integrated spring-loaded technology further enhances usability by automatically opening the pliers after each use, minimizing effort and preventing hand cramping and fatigue during repetitive work.

These versatile pliers feature a tapered nose with fine tips, making them ideal for delicate operations such as bending and shaping wire, intricate jewelry making, precise computer maintenance, detailed electronics repair, and securely gripping very small objects. Adding to their utility, a convenient side cutter is integrated into the design, allowing for clean and precise cuts on wires, soft metals, plastics, paper, and other light-duty materials.

Measuring at a compact 5.2 inches (13.2 cm), these Needle Nose Pliers are easy to handle and perfect for working in tight or confined spaces. Whether you're crafting custom jewelry, performing detailed repairs, assembling models, or engaging in various precision tasks, the Excel Blades 5in Needle Nose Pliers with Cutter offer the control and reliability you need to achieve professional results.

KEY FEATURES

• Tapered nose with fine tips for precise gripping and wire bending.
• Integrated side cutter allows for clean, easy cuts on various materials.
• Crafted from durable carbon steel for long-lasting sharpness and strength.
• Plastic grip handles offer ultimate comfort and a secure, non-slip hold.
• Spring-loaded mechanism reduces hand fatigue during repetitive tasks.

Excel Blades – Fixed Point Scribe Tool 
30604

• Multipurpose etching tool
• Aluminum body 
• Includes fixed point .058" steel tip.
• Use for: etching, marking and scoring, making hole, fine lines, removing stitches and releasing air bubbles, flooding with royal icing, needle modeling tool
• Use with: leather, paper, wood, plastic, vinyl, fondant
• California Prop 65 Warning: Lead. Nickel.- Cancer. For more information visit: www.p65warnings.ca.gov/
• Made in the USA

Neutral Grey is a perfectly balanced, cool-neutral grey with no warm or cold bias, making it an essential utility color for blending, vehicle panels, concrete, and general-purpose grey painting on scale models. Part of AK Interactive's 3G Acrylic line — water-based, fast-drying, and easy to thin with water. Comes in a 17ml (.57 oz.) bottle. SKU: AK11018.

New England Railroads Set #1 6 Bottles (Airbrush-ready) - Model Paint Set

The New England Railroads Set #1 offers a premium collection of six airbrush-ready acrylic paints specially formulated for detailed model railroad projects. Each bottle features Tru-Color's unique acrylic "hot" paint formula that contains acetone and other media as its base, providing excellent adhesion and vibrant finish.

• Special acrylic “hot” paint formula with acetone base
• Available in six distinct colors representing New England railroad schemes
• Airbrush-ready consistency for smooth application
• Soft plastic bottles designed for easy solvent mixing and refill
• Special order only with shipping in 4-8 days

Compared to other model paint options, this set excels in flexibility and performance thanks to its optimized formula for airbrush use. Unlike prior Floquil paints, Tru-Color’s paint offers reduced fumes while maintaining rich coverage. The thinner and rejuvenator products are compatible with both airbrush and brush formulas, allowing users to customize consistency for various techniques.

Key Technical Advantages: Technology and Performance

Tru-Color Paint is engineered with a carefully balanced mixture of acetone and acrylic mediums that deliver a durable and vivid finish tailored for scale model enthusiasts. Its thin airbrush-ready formula ensures smooth application without clogging, making it ideal for fine detailing on railroad models. The innovative soft plastic bottles allow replenishing evaporated solvent with Tru-Color’s thinner or rejuvenator, preserving the original pigment-to-solvent ratio. This feature helps maintain paint performance over time, unlike conventional bottles. Additionally, the requirement for surface mail shipping guarantees the product arrives in superior condition, preserving quality for professional-level results.

David Sweetland's color photography trip over the rails of New England (excluding the Boston & Albany) took place during the 1940s and 1950s. His focus is on the motive power and company structures along the right-of-way with steam power included whenever possible. The railway trip ends on the original Springfield Terminal in Vermont where steeple-cab motors ruled.

Enjoy the selection of scenes from more than 50 years ago before color film was commonly exposed on railroad equipment. Four Ways West Publications, hardcover, 128 pages, 8.5 x 11 x .5 in., Color photographs with captions.

• New Haven 401 GREEN color — part of the Tru-Color Paint line for general hobby use
• 1 oz bottle, pre-thinned and airbrush-ready right out of the bottle
• Solvent-based acrylic (pigment thinned in acetone) — strong adhesion to metal, plastic, and primed surfaces
• Dries to a smooth, durable finish ideal for decal application
• If paint thickens over time, restore with Tru-Color Rejuvenator or Thinner

• New Haven 401 GREEN color — part of the Tru-Color Paint line for general hobby use
• 2 oz bottle, pre-thinned and airbrush-ready right out of the bottle
• Solvent-based acrylic (pigment thinned in acetone) — strong adhesion to metal, plastic, and primed surfaces
• Dries to a smooth, durable finish ideal for decal application
• If paint thickens over time, restore with Tru-Color Rejuvenator or Thinner
• Special Order Only

Morning Sun Books, hardcover with dust jacket, 128 pages, 8.5 x 11 x.5 in., all Color photographs with captions.

Authored in cooperation with The New Haven Railroad Historical and Technical Association. Ranging from Railfan photographs, taken as early as 1949, to the company archives as professionals were used to record new and rebuilt equipment arriving during the 1950s, this book is a must for the NH fan.

Contents:

• Introduction, pp. 3–9
• Box Cars, pp. 10–28
• Hopper Cars, pp. 29–31
• Covered Hoppers, pp. 32–34
• Gondolas, pp. 35–37
• Flat Cars, pp. 38–47
• Office Cars, pp. 48–50
• Stillwell, p. 51
• Parlor Cars, pp. 52–59
• Diners/Grill Cars, pp. 60–64
• Head End Cars, pp. 65–69
• Baggage Cars, pp. 70–71
• Combines, pp. 72–73
• Coaches, pp. 74–86
• Work Equipment and Caboose Roster, p. 87
• Cabooses, pp. 87–99
• Hi Rail, pp. 100–101
• Derricks, pp. 102–107
• Miscellaneous, pp. 108–128.